GPU In-Game Overlay Won't Open? NVIDIA, AMD & Steam Overlay Toggles, Hotkeys & Permissions Diagnosis Guide

2026-11-14 | GPU Repair | 30 minutes | HK GPU Fix Editorial Team

GPU In-Game Overlay Won't Open? NVIDIA, AMD & Steam Overlay Toggles, Hotkeys & Permissions Diagnosis Guide

Key Takeaway

Alt+Z, Alt+R or Shift+Tab doing nothing does not mean the graphics card has failed. An in-game overlay is a software layer that must hook into the game, and it appears only when its master switch is on, its hotkey is free, the display mode allows the hook, and its permissions match the game. Check those four conditions before reinstalling drivers.

The Opposite Problem: An Overlay That Will Not Open

Most overlay advice on this site deals with the opposite direction: an overlay that is already running and causing trouble, so the answer is to turn it off. This guide deals with the reverse situation. The game runs normally, the picture is normal, the frame rate is normal, and the overlay simply will not appear when its hotkey is pressed. Nothing pops up, no error message appears, and there is no clue about which part of the chain has failed.

That silence is the defining feature of the problem. An overlay that will not open is not the same fault as an overlay that crashes a game, and the two must not be treated with the same remedy. Turning an overlay off is the correct test when the overlay is suspected of breaking a game. When the overlay itself will not open, turning it off again achieves nothing. The task here is to find the overlay again, not to remove it.

The core claim of this guide is simple: an overlay that will not open is almost never a failed graphics card. It is a software layer that needs four conditions at the same time, and one of them has not been met. Identify which overlay is involved, which game is involved, and whether the hotkey works on the desktop, then check the four conditions one at a time. Reinstalling the driver before that work is done wastes an evening and leaves the real cause untouched, because most of the causes in this guide have nothing to do with the driver at all.

This guide covers Windows 10 and Windows 11 desktop computers, and the in-game overlays of the NVIDIA App and GeForce Experience, AMD Software: Adrenalin Edition, and Steam. Discord, Xbox Game Bar, MSI Afterburner, and other recording tools appear only as possible sources of interference, because they can claim the same hotkey or the same hook point.

What an In-Game Overlay Actually Is

An in-game overlay is a second program drawing an extra interface on top of the game picture. The NVIDIA overlay provides recording, Instant Replay, frame-rate display, and game filters. The AMD overlay provides recording, performance metrics, and display settings. The Steam overlay provides friends, a web browser, and screenshots. Each one works by inserting its own code into the game's graphics flow, so that its interface is drawn as part of the same picture the game is producing.

That insertion has three prerequisites. The overlay program must be running, it must recognise the game that is running, and it must have enough permission to place its code inside the game's process. If any one of those prerequisites fails, the overlay does not appear, and it does so silently. There is no error message saying "the master switch is off" or "another program has taken this hotkey" or "the permission levels do not match." The user sees only the absence of the overlay, and has to work out which prerequisite failed by testing.

That is why the game running normally is itself useful evidence. If the game renders correctly and holds its frame rate, the graphics card, the driver, and the game's rendering path are all working. The fault is confined to the overlay layer that sits on top of them. A failed graphics card does not produce a perfectly running game with a missing menu. A missing overlay with a healthy game points at the overlay's own switch, hotkey, display mode, or permission level.

The Four Overlays: Master Switches and Hotkeys

No earlier guide on this site has listed all four overlays together with their master switches and default hotkeys. The table below is the central reference for this article. Interface wording can change between versions, so the names of menus and features should be checked against the version installed at the time, rather than memorised from an old screenshot. What matters is the function and its location, not the exact label on a particular build.

OverlayMaster switch locationDefault hotkeyNotes
NVIDIA App overlayNVIDIA App, Settings, Features, In-Game OverlayAlt+ZThe NVIDIA App is the current software. GeForce Experience is the older software and no longer receives new features. The NVIDIA App also has an Overlay button in the program itself that opens the overlay directly.
GeForce Experience overlay (older software)Settings, General, In-game OverlayAlt+ZUses the same hotkey as the NVIDIA App. A machine still running the older software has the switch in a different place, and the two must not be confused.
AMD Software overlayAMD Software, Settings (the gear icon), Preferences, In-Game OverlayAlt+RThe performance metrics overlay is a separate switch with its own default hotkey, Ctrl+Shift+O. Opening the Radeon menu without seeing a frame-rate readout does not mean the overlay is broken; it may mean only the metrics switch is off.
Steam overlaySteam, Settings, In-Game, Enable the Steam Overlay while in-game (global), plus the individual game's properties, General, Enable the Steam Overlay while in-game (per game)Shift+TabBoth layers must be on. If the global switch is on but the per-game switch is off, that game will not open the overlay.

Two distinctions in that table decide most diagnoses, and both are easy to miss.

First, the master switch is not the same as the individual feature switches. Recording, Instant Replay, frame-rate display, and game filters each have their own switches inside the overlay. If the master switch is off, the whole overlay will not appear, even if every individual feature switch is on. If the master switch is on but one feature switch is off, only that feature is missing and the overlay itself still opens. "Instant Replay is on" is therefore not evidence that "the overlay is on." The two layers must be checked separately, and the master switch must be checked first.

Second, the overlay switch is not in the NVIDIA Control Panel. The Control Panel and the NVIDIA App are two different programs with different jobs. Looking for the overlay switch inside the Control Panel will not find it, and concluding from that search that the overlay has been removed is a mistake. The same applies on the AMD side: the overlay switch is inside AMD Software, not inside a Windows settings page.

One further warning belongs here. The NVIDIA App requires a GeForce RTX 20, 30, 40, or 50 series card. A GTX card cannot run the NVIDIA App, and its overlay still lives in GeForce Experience. A GTX owner who is told to look in the NVIDIA App will search for a switch that does not exist on that machine. The correct switch for that machine is the GeForce Experience one in the table above.

The Five Layers of Suspicion

Once the overlay and its switch are identified, the fault can be placed in one of five layers. Each layer has its own decisive test, and the order matters: the layers are arranged from the easiest to check to the deepest and most disruptive, so that the driver is reached last, not first.

LayerWhat it coversDecisive test
1. Switch layerThe master switch has been turned off, or a driver or program update has quietly reset itGo to the switch location in the table above and look at its actual state with your own eyes. Turn it off and on again, wait a few seconds, restart the overlay program, and try again.
2. Hotkey layerThe hotkey has been changed, or another program has claimed the same combinationOpen the Shortcuts or Hotkeys page inside the overlay settings and read the combination that is actually bound now. Close other overlays, keyboard remapping tools, and recording software one at a time, and try again after each one.
3. Display mode layerThe game's display mode does not allow the overlay to hook in, or the overlay only appears in one modeTry the desktop test first (see the next section). In the game, switch to borderless windowed mode and try the hotkey, then switch back to exclusive fullscreen and try again. Note which mode works and which does not.
4. Permission layerThe game runs as administrator but the overlay program does not, so the permission levels do not match and the injection is blockedRun the overlay program (the NVIDIA App or Steam) as administrator and try again; or remove the game's "Run as administrator" setting and compare. Change only one side at a time.
5. Program and driver layerThe overlay program itself has stopped responding, the installation is incomplete, the driver version has a problem, or the system is missing a media componentQuit the overlay program completely and start it again, restart Windows, and update the NVIDIA App and the graphics driver. AMD users can use Factory Reset to restore settings. Windows N editions need the Media Feature Pack. Only after the first four layers have been cleared should a clean driver reinstall be considered.

The order is itself the diagnosis. A reader who jumps straight to layer five and reinstalls the driver has skipped four layers that have nothing to do with the driver, and will usually find the overlay still missing afterwards, with the same silence and no new information. A reader who works through the layers in order will either find the fault early or arrive at layer five with four layers already ruled out, which is a far stronger position.

The Desktop Test: The Single Most Important Step

Before changing anything, press the overlay hotkey on the desktop, with no game running. The NVIDIA overlay and the AMD overlay should both open on the desktop; the NVIDIA App also has an Overlay button that can be clicked directly. This one test splits the whole problem in two.

If the overlay opens on the desktop but not inside a game, the overlay program itself is working. Its switch is on, its hotkey is free, and the program is running. The fault is on the game side: the display mode, the anti-cheat system, or the game not being recognised by the overlay program. The investigation should stay with the game and its settings.

If the overlay does not open on the desktop either, the fault is in the overlay program itself: the master switch, the hotkey binding, a program that has stopped responding, or a driver problem. The game and its settings are not the place to look yet, because the overlay cannot even open where there is no game to interfere with it.

The Steam overlay needs a qualification here. Steam's overlay is tied to a game running through Steam, so the desktop test does not behave the same way for Steam as it does for NVIDIA and AMD. Do not treat the desktop test as identical across all four overlays. For Steam, the equivalent first split is different: does the overlay open in any Steam game, or only in one particular game? If it opens in other Steam games but not in one, the fault is specific to that game, its per-game switch, or the way it was launched. If it opens in no Steam game, the fault is in the global switch, the hotkey, or the Steam program itself.

Write down the result of the test before moving on. "Desktop works, game does not" and "desktop does not work either" lead to different layers, and a diagnosis that forgets which one was observed will chase the wrong layer.

The Permission Layer: The Most Counter-Intuitive Cause

The permission layer is the most counter-intuitive cause in this guide, and the one most often overlooked. The rule is consistent across independent sources: if a game runs as administrator and the overlay program does not, the overlay cannot hook into the game, because a lower-privilege program cannot inject code into a higher-privilege process. The game runs perfectly, the overlay program runs perfectly, and the two simply cannot connect because they are operating at different privilege levels.

The remedy follows directly from the rule. Either run the overlay program as administrator as well, so that both sides are at the same level, or remove the game's "Run as administrator" setting, so that both sides are at the normal level. Change only one side at a time and test after each change, so that it is clear which change made the difference. Changing both sides at once may fix the problem while hiding which side was responsible, and that matters the next time the problem returns.

This is not an instruction to run everything as administrator. Running programs at administrator level as a habit widens what those programs can do to the system, and it should not be adopted as a general practice. The point is narrower: check whether the game and the overlay program are at the same privilege level, and make them match for the purpose of this test. Once the cause is confirmed, the reader can decide which side to keep at which level, rather than leaving every program elevated.

The permission question also explains why the problem can appear suddenly on a game that used to work. A game that was given administrator rights to fix a different problem, such as a save file that could not be written, can start blocking its overlay from that moment on, with no visible connection between the two changes. The overlay did not break; its permission relationship with the game changed.

The Hotkey Layer: Has Something Else Taken the Combination?

Alt+Z, Alt+R, and Shift+Tab are all combinations that other software can claim. Discord, Xbox Game Bar, MSI Afterburner, screen recording tools, keyboard remapping utilities, and even a second NVIDIA product can all bind the same keys. When two programs claim the same combination, pressing it may open the other program, do nothing visible, or trigger a function in the other program while the overlay stays silent.

The way to confirm this is to look, not to guess. Open the Shortcuts or Hotkeys page inside the overlay settings and read the combination that is actually bound at this moment. If it is no longer the default, either use the combination that is shown, or change it back to the default. Then close the other candidates one at a time and test after each one. Closing everything at once and finding the overlay works again proves that something was interfering, but it does not identify which program it was, and the problem will return the next time that program starts.

One specific conflict deserves a mention. GeForce NOW has its own overlay, and it shares Alt+Z with the NVIDIA App overlay. Pressing Alt+Z can then open both at once. The remedy is to change the hotkey in one of the two, not to uninstall either one. Uninstalling a program to resolve a hotkey clash is a disproportionate response to a setting that can simply be changed.

A related point: the hotkey pages in overlay software sometimes have their own master switch, such as a "Use Hotkeys" toggle on the AMD side. If that toggle is off, no hotkey will work even though the overlay switch itself is on. Both toggles belong to the switch layer, and both need to be checked.

The Display Mode Layer: Fullscreen, Borderless, and Launch Method

The game's display mode decides whether the overlay can hook into the picture at all. Exclusive fullscreen gives the game direct control of the display, and some overlays hook more reliably there. Borderless windowed mode runs the game inside a window that fills the screen, and some overlays hook more reliably there. Which mode works better depends on the overlay, the game, and the driver version, so the correct approach is to test both and record the result, not to assume one mode is always right.

The practical test is simple. In the game's display settings, switch to borderless windowed mode and press the hotkey. Then switch back to exclusive fullscreen and press it again. Note which mode works and which does not. That note is the evidence for the next step: if the overlay works in one mode and not the other, the display mode is the cause, and the reader can choose the working mode or look for a setting in the game that explains the difference.

For Steam users there is an additional detail. A game should be launched from the Steam library, not by double-clicking its executable file directly. Launching the executable directly can leave Steam unable to hook into the game, because the game was not started through the program that provides the overlay. The game will run normally, which makes the cause easy to miss, while the overlay has no connection to it. Launching from the library and testing again is a quick check that costs nothing.

Laptop users should also be aware of a related boundary. On a laptop with switchable graphics, a game running on the integrated graphics may not be reachable by the discrete card's overlay. If the overlay works on a desktop with the same software but not on a laptop, the question of which graphics processor is actually driving the game belongs in the investigation, before the driver is blamed.

Anti-Cheat: When the Game Blocks the Injection Quietly

Anti-cheat systems actively check whether outside code has been inserted into a game. In some cases they end the game outright when they detect an insertion. In other cases they do something quieter: they block the injection without ending the game, so the game runs normally while the overlay never appears. The second form is the one that belongs in this guide, because it produces exactly the symptom described here — a healthy game and a missing overlay.

The way to distinguish this cause from the others is comparison. If the overlay will not open in a competitive game with anti-cheat, but opens normally in games without anti-cheat, the anti-cheat system is a plausible cause. If the overlay will not open in any game at all, the cause is not anti-cheat, because anti-cheat cannot explain a failure in games that have none. Return to the first layer and work through the switch and hotkey checks again.

Two red lines belong here and must be stated plainly. Disabling the anti-cheat system is not a suggested remedy, and neither is disabling antivirus software. Those are not troubleshooting steps; they are actions that would leave the machine and the game account exposed, and they should not be presented as options. If a game with anti-cheat is the only one affected, the honest conclusion is that the overlay may not be usable in that game, and the reader should use the overlay in other games or use the game's own recording and screenshot tools instead.

The Seven Steps, In Order

The sequence below is the diagnostic method of this guide. The order is deliberate: each step rules out one layer before the next layer is touched, and no step is skipped on the assumption that it cannot be the cause.

  1. Describe the fault precisely. Which overlay — NVIDIA, AMD, Steam, Discord, or Xbox Game Bar? Which game? Does the hotkey work on the desktop? Does the overlay fail in every game or only in one? Write down the hotkey binding that is currently shown in the settings.
  2. Check the master switch. Using the table above, go to the switch location for that overlay and confirm with your own eyes that it is on. Turn it off and on again, wait a few seconds, restart the overlay program, and try again. AMD users should check both the In-Game Overlay switch and the separate Metrics Overlay switch.
  3. Check the hotkey. Open the Shortcuts or Hotkeys page and read the combination that is actually bound now. If it is no longer the default, use the combination shown, or change it back to the default. Then close other overlays, keyboard remapping tools, and recording software one at a time, testing after each one.
  4. Compare display modes. Switch the game to borderless windowed mode and try the hotkey, then switch back to exclusive fullscreen and try again. Record which mode works. Steam users should confirm the game was launched from the Steam library, not by double-clicking its executable file.
  5. Compare permission levels. Run the overlay program as administrator and try again. If that does not work, remove the game's "Run as administrator" setting and try again. Change only one side at a time.
  6. Close other overlays one at a time. Close Discord, Steam, MSI Afterburner, Xbox Game Bar, and other recording tools one at a time, re-entering the game and testing after each closure. Closing them all at once may fix the problem without revealing which one was responsible.
  7. Update, reset, and know when to stop. Update the NVIDIA App and the graphics driver. AMD users can use Factory Reset to restore settings, or the AMD Cleanup Utility for a clean reinstall. Windows N editions should install the Media Feature Pack. If all seven steps have been completed and the overlay still will not open, or if the problem is accompanied by driver crashes, a black screen, or coloured artefacts on screen, stop and bring the machine in with a full record.

That record should include the overlay involved, the game or games affected, the result of the desktop test, the display mode that was tested, whether the game runs as administrator, the driver version, and the exact wording of any error message. A record that precise lets an inspection start at the right layer instead of repeating the whole sequence.

Diagnostic Logic: Reading the Symptom

SymptomMost likely causeNext step
No overlay opens on the desktop or in any gameMaster switch off, hotkey taken, or the overlay program has stopped respondingCheck the switch and the hotkey binding first, then quit the overlay program completely and start it again
Overlay opens on the desktop but not in a gameDisplay mode, anti-cheat, or the game not being recognised by the overlay programSwitch between borderless windowed and exclusive fullscreen, and compare with a game that has no anti-cheat
Overlay opens in some games but not in one particular gameThat game's per-game switch, its display mode, its anti-cheat, or the way it was launchedCheck the per-game switch, launch from the library, and compare display modes in that game alone
Overlay opens but the frame-rate readout is missingThe metrics switch is off, not the overlay switchOn AMD, check the separate Metrics Overlay switch and its hotkey; on NVIDIA, check the statistics feature switch inside the overlay
Overlay stopped working after a driver or program updateThe update quietly reset the switch or the hotkey bindingRe-check the switch and the hotkey from the table above before doing anything else; do not assume the update itself is faulty
Overlay stopped working after the game was set to run as administratorPermission levels no longer matchRun the overlay program as administrator as a test, or remove the game's administrator setting, changing one side at a time
Two overlays open at once, or the wrong one opensTwo programs share the same hotkeyChange the hotkey in one of them; do not uninstall either program
Overlay will not open while a protected video is playingOn AMD, protected video playback can block the overlay, including a streaming tab left open in a browserClose the protected video and any idle streaming tabs, then try again

Edge Cases That Are Not This Problem

An overlay that opens but is blank or missing settings. That is a different fault with its own causes. On the NVIDIA side, one known cause is the Windows Videos folder having been moved to an external drive or a network location. It should not be described as the same symptom as an overlay that will not open.

An overlay that opens but recording fails, has no sound, or produces no file. That belongs to the recording chain that follows the overlay: capture settings, save location, and protected content. It is not the subject of this guide.

An overlay that will not open while protected video is playing. On the AMD side, playing a protected video such as a film on Netflix or Prime Video can block the overlay, and even a streaming tab left idle in a browser can be enough to trigger it. This is an AMD-specific boundary and should not be presented as something that happens with every overlay.

A game that does not support overlays at all. Some games that use software rendering do not support overlays, and some games are designed in a way that prevents the overlay from hooking in. Not every game can be made to open an overlay, and this guide should not promise that all of them can.

A control panel that will not open. A control panel that fails to open is a different problem from an overlay that fails to open. The two should not be merged, and fixing one does not fix the other.

A driver update that quietly reset the switch. This deserves emphasis because a setting changed by an update is easy to miss. After a driver or program update, the switch or the hotkey binding can be reset without any notice. The overlay that worked yesterday stops working today, and the reader assumes the update broke something. In many such cases the update only changed a setting, and re-checking the switch and the hotkey restores the overlay without any further work. That is why the switch check comes before any reinstall.

User reports under AMD Adrenalin 26.9.1, 26.9.2 and 26.10.1. Under these driver versions, some users have reported that the overlay will not open on RX 9070 XT and RX 7900 XTX cards, and that rolling back to 26.8.1 restores it. These are user reports; AMD has not listed this as a known issue, so it should not be treated as an official acknowledgement. If the symptoms match, compare the driver version first, then decide whether to roll back or wait for the next driver release.

Six Common Mistakes

  1. Treating no response to Alt+Z as a failed graphics card. The overlay is a software hook layer. A game that runs smoothly already proves the hardware is working. Reinstalling the driver cannot fix a switch that is off, a hotkey that has been taken, or a permission mismatch.
  2. Confusing an individual feature switch with the master switch. Recording or Instant Replay being on is not the same as the overlay being on. If the master switch is off, the whole overlay stays hidden.
  3. Reinstalling the driver to fix every overlay problem. The driver is only the fifth layer. The switch, the hotkey, the display mode, and the permission level have nothing to do with the driver, and reinstalling the driver will not fix any of them.
  4. Running several overlays at once and assuming they cannot interfere. Several overlays claiming the same hook point or the same hotkey can interfere with each other. Close them one at a time and test after each one.
  5. Assuming that running a game as administrator cannot affect the overlay. Unequal permission levels block the injection directly. It is one of the most easily overlooked causes.
  6. Treating turning the overlay off as the solution. Turning the overlay off is a comparison test that proves the overlay is involved in a problem. This guide's problem is that the overlay will not open at all, which is the opposite direction, and the remedy is to find the overlay, not to remove it.

When to Stop and Bring the Machine In

Stop when all seven steps have been completed and the overlay still will not open, or sooner if the problem is accompanied by a driver crash, a black screen, or coloured artefacts on screen, because those signs have left this guide and belong to a hardware inspection.

Bring the machine in with a complete record: the overlay involved, the games affected, the result of the desktop test, the display modes tested, whether the game runs as administrator, the driver version tried, and any error messages in their exact wording. Inspection takes place at Room 1209, Dali Plaza, Shek Mun. You can call 2186 8010, or reach the shop on WhatsApp at 6558 6806. Inspection is charged at the site's published three-tier fees of HK$400–2,800, quoted after inspection. There is no home-visit service and no Mong Kok shop; inspection is carried out in the shop.

Frequently Asked Questions

Pressing Alt+Z / Alt+R / Shift+Tab does nothing at all — what should I check first?

Start with the desktop test and the master switch. Press the hotkey on the desktop with no game running: if the overlay opens there, the overlay program works and the fault is on the game side. Then go to the switch location for your overlay — NVIDIA App, Settings, Features, In-Game Overlay; AMD Software, Settings, Preferences, In-Game Overlay; or Steam, Settings, In-Game — and confirm with your own eyes that the master switch is on. Those two checks split the problem before any deeper work begins.

Where is the overlay switch in the NVIDIA App and in GeForce Experience, and how do the two differ?

In the NVIDIA App, the switch is under Settings, Features, In-Game Overlay. In GeForce Experience, the older software, it is under Settings, General, In-game Overlay. Both use Alt+Z as the default hotkey. The difference is the software itself: the NVIDIA App is the current program and GeForce Experience no longer receives new features. A GTX card cannot run the NVIDIA App, so its overlay switch is still the GeForce Experience one. Do not look for the switch in the NVIDIA Control Panel, which is a different program.

Why does the overlay open on the desktop but not inside a game?

Because the overlay program itself is working, and the fault is on the game side. The game's display mode may not allow the overlay to hook in, the game's anti-cheat system may be quietly blocking the injection, or the game may not be recognised by the overlay program. Switch the game between borderless windowed mode and exclusive fullscreen and test in each mode, compare with a game that has no anti-cheat, and for Steam confirm the game was launched from the Steam library rather than by double-clicking its executable file.

Has another program taken my hotkey? How do I confirm it and change it back?

Open the Shortcuts or Hotkeys page inside the overlay settings and read the combination that is actually bound now. If it is no longer the default, use the combination shown or change it back to the default. Discord, Xbox Game Bar, MSI Afterburner, recording tools, and keyboard remapping utilities can all claim the same combination, so close them one at a time and test after each one. GeForce NOW also shares Alt+Z with the NVIDIA App overlay; change the hotkey in one of them rather than uninstalling either program.

Can running a game as administrator stop the overlay from opening?

Yes. If a game runs as administrator and the overlay program does not, the overlay cannot inject its code into the higher-privilege game process, because a lower-privilege program cannot place code inside a higher-privilege process. The game runs normally and the overlay stays silent. Test by running the overlay program as administrator as well, or by removing the game's "Run as administrator" setting, changing only one side at a time so the cause is clear.

How do exclusive fullscreen and borderless windowed mode affect the overlay?

The display mode decides whether the overlay can hook into the game's picture. Some overlays hook more reliably in exclusive fullscreen, where the game has direct control of the display; others hook more reliably in borderless windowed mode, where the game runs inside a window that fills the screen. Which mode works better depends on the overlay, the game, and the driver version, so test both modes in the same game and record which one works. That result is the evidence, not an assumption about which mode should work.

Can running several overlays at once interfere with each other, and how should I test that?

Yes. Several overlays can claim the same hook point or the same hotkey, and they can interfere with each other even when each one works on its own. Test by closing them one at a time — Discord, Steam, MSI Afterburner, Xbox Game Bar, and other recording tools — re-entering the game and pressing the hotkey after each closure. Closing them all at once may fix the problem without revealing which one was responsible, so the problem is likely to return.

Can anti-cheat software block the overlay, and how can I tell?

Yes, in two ways. Some anti-cheat systems end the game when they detect outside code being inserted; others quietly block the injection without ending the game, so the game runs normally while the overlay never appears. Compare games: if the overlay fails only in a competitive game with anti-cheat but works in games without it, anti-cheat is a plausible cause. If it fails in every game, the cause is not anti-cheat. Do not disable anti-cheat or antivirus software as a remedy.

Why did the overlay suddenly disappear after a driver or app update?

Because an update can quietly reset the master switch or the hotkey binding without any notice. The overlay that worked yesterday stops working today, and the update is blamed for breaking something when it has only changed a setting. Re-check the switch location and the hotkey binding from the table in this guide before doing anything else. In many such cases restoring the switch and the hotkey restores the overlay without any further work. Another possibility is the driver version itself: under AMD Adrenalin 26.9.1, 26.9.2 and 26.10.1, some users have reported that the overlay will not open. These are user reports, and AMD has not listed the problem as a known issue, so compare the driver version first.

I have tried all the steps above and it still does not work — what should I do next?

Stop and bring the machine in with a full record: which overlay, which games, the result of the desktop test, the display modes tested, whether the game runs as administrator, the driver version, and any error messages in their exact wording. Inspection takes place at Room 1209, Dali Plaza, Shek Mun. Call 2186 8010, or reach the shop on WhatsApp at 6558 6806. Inspection is charged at the site's published three-tier fees of HK$400–2,800, quoted after inspection. There is no home-visit service and no Mong Kok shop.

Related articles

Related services

If you need Chip-level GPU repair, see these service pages: