Game FPS Drops After Enabling HDR? HDR Performance Cost, Colour Depth, Bandwidth & Mode-Switch Diagnosis Guide

2026-11-14 | GPU Repair | 32 minutes | HK GPU Fix Editorial Team

Game FPS Drops After Enabling HDR? HDR Performance Cost, Colour Depth, Bandwidth & Mode-Switch Diagnosis Guide

Key Takeaway

Enabling HDR rarely costs much frame rate on its own: most modern games already render in high dynamic range internally, so switching HDR on mainly changes the output path, not the rendering. When the frame rate really falls, something else usually changed at the same time. This guide works through five layers and seven steps to find what changed.

What This Problem Is — and What It Is Not

The symptom has a shape, and the shape is the whole diagnosis. The same game, on the same machine, runs at a normal frame rate with HDR switched off. Switch HDR on, and the frame rate falls noticeably. Switch it off again, and the frame rate recovers. Nothing else has changed — or so it seems. The point of this guide is that "nothing else has changed" is almost never true, and the work is to find out what actually changed alongside the HDR switch.

That before-and-after shape is what separates this problem from every similar one. A frame rate that falls without any switch being flipped is a different problem, covered by the guide on sudden frame rate drops. A frame rate that falls after ray tracing is switched on is a different problem too, covered by the guide on ray tracing cost — ray tracing adds new rendering work, and HDR does not work the same way. A picture that turns washed out, shifts colour, or goes black after HDR is switched on is a picture quality problem, covered by the guide on HDR picture quality, not a performance problem. And a resolution or refresh rate that cannot be reached at all is a bandwidth problem, covered by the guide on reaching 4K at high refresh rates. This guide is only about one thing: the frame rate falls when HDR is switched on, in a game that was running normally with HDR off.

Four conditions must all be true before the steps below apply:

  1. The same game, on the same machine, shows a clear frame rate difference between HDR on and HDR off, measured in the same scene at the same quality settings.
  2. The frame rate is measured with numbers — the game's built-in counter or a monitoring tool — not judged by feel. A feeling that the game is slower is not a measurement, and it is dealt with separately in Layer Five.
  3. The game is running and playable in both states. If the game cannot be entered at all, that is a loading problem, not an HDR cost problem, and a different guide applies.
  4. The HDR switch is the only change being tested. If the resolution, the quality preset, or the scene changed at the same time, the comparison is not a comparison, and Step 1 must be redone properly before anything else is attempted.

The distinction this guide turns on is between HDR itself and everything that changes when HDR is switched on. Most modern games already render internally in high dynamic range, so switching HDR on does not add a new set of rendering work from nothing. What it mainly changes is the output path: the format the picture is delivered in, the colour depth it is delivered at, and the mode the display switches into. When the frame rate really falls, the cause is usually one of those accompanying changes, not HDR itself. The five suspicion layers below are the five places such a change can hide, and the seven steps are the order in which to find it.

The Before-and-After Test Is the Whole Diagnosis

Before changing anything, measure. Run the same game, in the same scene, at the same quality settings, once with HDR on and once with HDR off, and write down the frame rate in each case, using the game's built-in frame rate counter or a monitoring tool. Do not change the scene between the two runs. Do not change the quality preset. Do not measure one run in a quiet corridor and the other in a crowded battle and compare the two numbers as though they were the same test. A comparison made in different scenes is not a comparison.

The reason the measurement matters is that it is the only evidence that separates a real frame rate drop from a feeling. A game can feel slower after HDR is switched on without its frame rate having fallen at all — the display may have switched into a different processing mode, and the input response may have changed, while the frame rate stayed exactly where it was. That feeling is real, and it is dealt with in Layer Five, but it is not a frame rate drop, and treating it as one leads to the wrong fix. Conversely, a real frame rate drop that is never measured cannot be localised: without two numbers, there is no way to know whether the drop is large or small, whether it appears in one game or in all of them, or whether turning things off one at a time brings it back.

Write the two numbers down, with the scene and the settings noted alongside them. That pair of numbers is the baseline every later step is judged against. If a later step claims to have fixed the problem, the proof is that the two numbers come back together — not that the game feels better.

The Five Suspicion Layers

An HDR frame rate drop can come from five layers, and they must be kept separate. Mixing them together is how a mode-switch problem gets treated by buying a new graphics card, or a conversion-layer problem gets treated by changing a cable, and how the real cause survives because the wrong layer was treated. The five layers below are ordered the way the diagnosis should work through them, and each one has its own deciding test.

Layer One: The Rendering Layer — the Game Already Renders in HDR Internally

The first layer is the counter-intuitive core of the whole guide, and it must be understood before any other layer makes sense: most modern games already render internally in high dynamic range. The game's internal rendering pipeline works with a wide range of brightness values, and the picture is then tone-mapped down into the format the display can show. Switching HDR on does not start that internal rendering from nothing. It mainly changes what happens at the end of the pipeline — the output path the finished picture takes to the display.

That is why the external sources on this question agree that HDR itself has only a small effect on frame rate in most cases. The cost exists, but it is small, and it varies with the scene. A large frame rate drop after switching HDR on is therefore unlikely to be the cost of HDR itself. It is a signal that something else changed at the same time — a mode switch, a conversion layer, or a setting that moved without being noticed. The diagnosis that starts from "HDR costs performance" and stops there has mistaken the trigger for the cause, and it will never find the real one.

The deciding evidence for this layer is the graphics card usage test in Step 3. If the graphics card usage does not rise when HDR is switched on, the rendering load has not risen, and the cause is not in the rendering layer. If the graphics card usage rises clearly, then the rendering layer is genuinely involved, and the search narrows to what the rendering pipeline is doing differently.

Layer Two: The Presentation Layer — the Output Format Changes from 8-bit to 10-bit

The second layer is the presentation layer: what changes is the format the picture is delivered in. With HDR off, the output is typically 8-bit colour per channel — 256 levels per channel. With HDR on, the output colour depth rises to 10-bit per channel — 1,024 levels per channel. The HDR10 format is 10-bit per channel, written as R10G10B10A2, and the scRGB format used by some HDR paths is a 16-bit floating-point format. DirectX 12 applications that use HDR work with 16-bit floating-point intermediate render targets. The output format changes, and the bandwidth and processing the output requires change with it.

The deciding evidence for this layer is the output format itself, read from the display settings or the graphics driver control panel: the colour depth, and the chroma subsampling in use. If the colour depth has risen from 8-bit to 10-bit, that is a real change, and it is part of what switching HDR on means. But a change in output format, on its own, is a small cost — it is not, by itself, an explanation for a large frame rate drop. What the presentation layer usually does is set up the conditions for the next layer: a 10-bit output at high resolution and high refresh rate demands more bandwidth than an 8-bit output, and that demand is where the next layer bites.

Layer Three: The Bandwidth Layer — 4K, High Refresh Rate, and 10-bit Meet a Hard Ceiling

The third layer is bandwidth, and it is a hard ceiling, not a cost curve. An uncompressed 4K signal at 10-bit colour depth with full 4:4:4 chroma subsampling needs around 40 Gbps of bandwidth. HDMI 2.1 tops out at 48 Gbps. That leaves little headroom, and at higher refresh rates the demand can exceed what the cable or the interface can carry. When the required format exceeds the available bandwidth, the system does not simply fail: it may silently enable Display Stream Compression, drop the chroma subsampling to 4:2:2 or 4:2:0, or lower the refresh rate. These compromises are the system fitting the picture into the bandwidth it has.

The deciding evidence for this layer is the output mode after HDR is switched on: the resolution, the refresh rate, the colour depth, and the chroma subsampling, read from the display settings or the driver control panel, and whether Display Stream Compression is active. If the refresh rate has fallen — from 144 Hz to 60 Hz, for example — or the chroma subsampling has changed, the problem is a mode change forced by bandwidth, not a rendering cost. A cable cannot make the frame rate fall: a cable carries the picture, and the frame rate is decided by the rendering. What a cable and an interface can do is force the system into a different mode, and that mode change is what the reader is actually seeing.

One caution at this layer: a frame rate that looks lower because the refresh rate has fallen is not the same as a frame rate that has fallen because the rendering got slower. If the display is now running at 60 Hz, the frame rate the reader sees may be capped at 60, and the game may be rendering perfectly well at that cap. The measurement in Step 1, done properly, is what separates the two.

Layer Four: The Mode Layer — What Else Changed When HDR Was Switched On

The fourth layer is the one that holds the cause most often, and it is the layer the whole guide is built to expose: switching HDR on is rarely just switching on one thing. The display switches into a different mode. The refresh rate may change. Variable refresh rate may re-negotiate its handshake. The game's own settings — resolution, quality preset — may change with it. And conversion layers may step in: Windows Auto HDR, which converts standard dynamic range content into HDR, and NVIDIA RTX HDR, which does the same conversion in the driver, are extra conversion layers with their own cost. A figure of roughly 5–7 percent has been quoted for NVIDIA RTX HDR — but that figure describes the RTX HDR conversion layer only, and it must never be written as the cost of switching HDR on in general. Native HDR and a conversion layer are different things, with different costs.

The deciding evidence for this layer is the settings comparison in Step 2: the resolution, refresh rate, chroma subsampling, and colour depth before and after the switch, and which conversion layers are active. If any of those changed, the change is the suspect, not HDR itself. If Auto HDR or RTX HDR is active, that conversion layer is the suspect, and the test is to switch it off on its own — one change at a time — and measure again. If the frame rate returns when the conversion layer is off, the culprit was the conversion layer, not HDR itself.

This layer is also the reason the diagnosis must change one thing at a time. Switching HDR off, changing the quality preset, and disabling Auto HDR all at once, and then seeing the frame rate recover, proves nothing about which of the three mattered — and the reader will not know what to do when the problem returns.

Layer Five: The Display Layer — Input Lag Is Not Frame Rate

The fifth layer is the display itself, and it exists to correct a confusion that derails this diagnosis more than any other: input lag is not frame rate. After HDR is switched on, the display may switch into a different processing mode, and the input lag — the time between the graphics card producing a frame and the display showing it — may increase. The game can feel slower, less responsive, heavier to control, while the frame rate has not moved at all. A feeling of slowness is not a frame rate drop, and the two must be measured separately.

The deciding evidence for this layer is the frame rate number from Step 1. If the measured frame rate is the same with HDR on and HDR off, then the frame rate has not fallen, whatever the game feels like, and the problem is in the display's processing mode, not in the rendering. If the measured frame rate has genuinely fallen, then the display layer is cleared, and the search returns to the mode and conversion layers. No figure for input lag in milliseconds should be quoted as a fact here: the figures that circulate for this come from low-quality sources without technical support, and the only claim this guide makes is that input lag may increase when the display switches mode.

LayerWhat can be wrongDeciding evidenceWhat resolves it
1. RenderingThe rendering load itself has risenGraphics card usage with HDR on versus offAccepting a small cost, or finding what raised the load
2. PresentationThe output format has changed from 8-bit to 10-bitColour depth and chroma subsampling in the display settingsUnderstanding the format change; it is a small cost on its own
3. BandwidthThe required format exceeds the cable or interface bandwidthResolution, refresh rate, chroma subsampling, and whether Display Stream Compression is activeA compliant cable, a direct connection, or accepting the mode the bandwidth allows
4. ModeSomething changed alongside HDR: refresh rate, variable refresh rate, a conversion layer, or a game settingThe before-and-after settings comparison; which conversion layers are activeRestoring the changed setting; switching off Auto HDR or RTX HDR one at a time
5. DisplayInput lag has increased, and the game feels slower without the frame rate fallingThe measured frame rate, HDR on versus off, in the same sceneMeasuring the frame rate instead of judging by feel

The Seven Diagnostic Steps

The seven steps below are ordered so that each one tests one layer, and so that no step destroys the evidence a later step needs. Work through them in order, one variable at a time, and write down the result of each step before moving on. Changing two things at once and seeing the frame rate recover leaves the reader not knowing which change mattered — and not knowing what to do when the drop returns.

Step 1: Measure the Frame Rate with HDR On and Off, in the Same Scene

Run the same game, in the same scene, at the same quality settings, once with HDR on and once with HDR off, and write down the frame rate in each case, using the game's built-in counter or a monitoring tool. Do not change the scene between the two runs. Do not change the quality preset. Do not measure one run in a quiet corridor and the other in a crowded battle.

This step proves that the problem is a measured frame rate difference, and it records the two numbers every later step is judged against. It proves nothing about the cause — that is what the steps below are for. But without the two numbers, nothing else can be checked: a claim that the frame rate "dropped a lot" without two numbers is a feeling, not a measurement, and a diagnosis built on a feeling is built on sand.

Step 2: Check Whether the Resolution, Refresh Rate, and Chroma Subsampling Changed Too

After switching HDR on, look at the resolution, the refresh rate, the chroma subsampling (4:4:4, 4:2:2, or 4:2:0), and the colour depth (8-bit or 10-bit), and compare each one against the values with HDR off. If the refresh rate has fallen, or the chroma subsampling has changed, the problem is a mode switch, not a rendering cost, and the search moves to the bandwidth and mode layers. If nothing changed, the mode layer is cleared, and the search moves on.

This step is the one most often skipped, and it is the one that most often holds the answer. A reader who switches HDR on and sees the frame rate fall, without checking whether the refresh rate fell with it, will blame the rendering for a change the display made. The settings comparison takes a minute, and it can save a graphics card purchase.

Step 3: Look at Graphics Card Usage and Power Draw

With HDR on, look at the graphics card usage and power draw, and compare them against the values with HDR off. If the graphics card usage has not changed noticeably while the frame rate has fallen, the problem is not the rendering load — it is in the mode, bandwidth, or conversion layers. If the graphics card usage has risen clearly, then the rendering cost layer is genuinely involved, and the search narrows to what the rendering pipeline is doing differently.

This step is the test that separates a rendering problem from everything else. A frame rate drop with no rise in graphics card usage is a frame rate drop that the rendering did not cause, and no amount of work on the rendering settings will fix it. A frame rate drop with a clear rise in graphics card usage is a rendering cost, and the settings that control it are the ones to examine.

Step 4: Split One Game from All Games

If only one game loses frame rate with HDR on, the problem is that game's HDR path — its in-game HDR setting, or a conversion layer acting on that game alone. If every game loses frame rate, the problem is at the system level: the driver, the Windows HDR setting, or the cable and interface. The split decides where to look next, and it must be made before any setting is changed, because a system-level fix applied to a single-game problem wastes time, and a single-game fix applied to a system-level problem will not hold.

Test at least one other game that supports HDR, in the same way: the same scene, the same settings, HDR on and off, two numbers written down. A single-game result and an all-games result point in opposite directions, and guessing which one applies is the worst possible next step.

Step 5: Restore One Thing at a Time — Auto HDR, RTX HDR, Driver Conversion, In-Game HDR

Switch off one thing at a time, and measure again after each change. Switch off Windows Auto HDR first, then NVIDIA RTX HDR, then any driver-level conversion, then the game's own in-game HDR setting — one at a time, with a measurement after each. Auto HDR converts standard dynamic range content into HDR, and RTX HDR does the same conversion in the driver; both are extra conversion layers with their own cost, and either one can be the cause. If the frame rate returns after one of them is switched off, that conversion layer was the culprit, not HDR itself.

The figure of roughly 5–7 percent quoted for NVIDIA RTX HDR describes that conversion layer only. It must never be read as the cost of switching HDR on in general, and it must never be used to predict how much frame rate any particular game will lose. Native HDR and a conversion layer are different things, and the diagnosis must keep them separate.

Step 6: Compare the Cable and the Interface

Connect the display directly, without an adapter or an extender in between, and try a cable that meets the specification — an Ultra High Speed HDMI 2.1 cable, or DisplayPort 1.4 or above — and check whether Display Stream Compression is active. A cable will not make the frame rate fall, and changing the cable will not raise the frame rate. What this step does is rule out the bandwidth layer: if the mode problems clear up with a direct connection and a compliant cable, the bandwidth layer was the cause of the mode switch. If nothing changes, the bandwidth layer is cleared, and the search returns to the mode and conversion layers.

One detail at this layer: not all ports on a television are the same. Some ports support the full bandwidth and some do not, and a display connected to a limited port will behave as though the cable were the problem, when the port is. Check which port the display is connected to, and what that port supports, before concluding the cable is at fault.

Step 7: Decide — and Record What Happened

The decision follows from the steps, and there are only three directions.

If the frame rate falls only slightly with HDR on, and the picture is clearly better, the cost may be acceptable. A small cost for a visibly better picture is a trade, not a fault, and the correct action may be to keep HDR on and accept it.

If the frame rate falls sharply but the graphics card usage has not changed, the problem is in the mode or conversion layers, and there is no need to change the graphics card. The fix is in the settings that changed, not in the hardware.

If the frame rate still falls sharply after every item has been restored one at a time, bring the machine in with the complete record: the frame rate with HDR on and off, the resolution, refresh rate, and chroma subsampling comparison, the graphics card usage, and which games are affected. Inspection takes place at Room 1209, Dali Plaza, Shek Mun. You can call 2186 8010, or reach the shop on WhatsApp at 6558 6806. Inspection is charged at the site's published three-tier fees of HK$400–2,800, quoted after inspection. There is no home-visit service and no Mong Kok shop; inspection is carried out in the shop.

StepWhat to doWhat it provesWhat it does not prove
1. Measure HDR on versus offSame game, same scene, same settings, two frame rate numbersWhether the frame rate has genuinely fallen, and by how muchWhat caused the fall
2. Check what else changedResolution, refresh rate, chroma subsampling, colour depth, before and afterWhether a mode switch is the causeAnything about the rendering load
3. Check graphics card usage and powerGraphics card usage and power draw, HDR on versus offWhether the rendering load has risenAnything about the mode or conversion layers
4. Split one game from all gamesTest a second HDR game the same wayWhether the cause is one game's HDR path or the systemWhich setting is at fault, on its own
5. Restore one thing at a timeSwitch off Auto HDR, RTX HDR, driver conversion, in-game HDR, one at a time, measuring after eachWhich conversion layer, if any, is the culpritAnything about the cable or interface
6. Compare the cable and interfaceDirect connection, a compliant cable, check Display Stream CompressionWhether the bandwidth layer forced a mode changeAnything about the rendering cost
7. DecideAccept a small cost, fix the mode or conversion layer, or bring the record inWhich direction follows from the evidenceAnything beyond the test that was actually run

Six Common Misconceptions

Misconception 1: HDR itself always costs a lot of frame rate

No. Most modern games already render internally in high dynamic range, so switching HDR on mainly changes the output path, not the rendering work. The cost exists, but it is small, and it varies with the scene. A large frame rate drop after switching HDR on is a signal that something else changed at the same time — a mode switch, a conversion layer, or a setting that moved. Blaming HDR itself stops the diagnosis at the trigger and never reaches the cause.

Misconception 2: A frame rate drop means the graphics card is not powerful enough

No. When the frame rate falls after HDR is switched on, the cause is usually something that changed alongside it — a mode switch, a conversion layer, or a refresh rate that moved — not the graphics card's rendering power. The graphics card usage test in Step 3 is the evidence: if the usage has not risen, the rendering load has not risen, and the card is not the bottleneck. Changing the card before restoring the changed settings one at a time is spending money on a problem the card did not cause.

Misconception 3: A better picture with HDR on must mean a large performance cost

No. How good the picture looks and how much performance it costs are not tied together. A picture can look clearly better with HDR on while the frame rate barely moves, because the improvement comes from the wider range of brightness and the deeper colour, not from extra rendering work. Judge the cost by the measured frame rate, not by how much better the picture looks. A beautiful picture and a large frame rate drop are two separate facts, and neither one proves the other.

Misconception 4: Increased input lag means the frame rate has fallen

No. Input lag is the time between the graphics card producing a frame and the display showing it. Frame rate is how many frames are rendered per second. They are two different things, measured in different ways. After HDR is switched on, the display may switch into a different processing mode, and the input lag may increase, while the frame rate stays exactly where it was. A game that feels slower is not necessarily a game that renders fewer frames. Measure the frame rate, and do not let a feeling stand in for a number.

Misconception 5: A more expensive cable will fix it

No. A cable will not make the frame rate fall, and changing the cable will not raise the frame rate. What a cable affects is the mode: whether the display can hold its resolution, refresh rate, and colour depth at the bandwidth available. If the frame rate has fallen, the cause is in the mode or conversion layers, and the cable is at most a contributor to a mode switch, never the cause of a rendering slowdown. Change the cable to rule out the bandwidth layer, not to fix the frame rate.

Misconception 6: Turning HDR off will bring the frame rate straight back

No. If the frame rate does not recover after HDR is switched off, the problem was never HDR in the first place. Something else has changed — a driver setting, a game setting, or a background program — and that something is still in effect. Do not keep blaming HDR. Start the diagnosis again from the beginning: measure the frame rate, compare the settings, and find what actually changed. A problem that survives the removal of its supposed cause was never caused by it.

Boundaries: Problems That Look Similar but Are Not This One

Not every frame rate problem is an HDR cost problem, and the similar problems each belong to their own guide. If the symptom is one of the following, follow that guide, not this one.

A picture that turns washed out, shifts colour, or goes black after HDR is switched on is a picture quality problem, and it belongs to the guide on HDR picture quality. A frame rate that falls after ray tracing is switched on is a ray tracing cost problem. A frame rate that falls suddenly, with no switch flipped at all, is a sudden frame rate drop problem. A resolution or refresh rate that cannot be reached at all is a bandwidth problem. A dark-area flicker after variable refresh rate is switched on is a variable refresh rate brightness problem. And a blurry picture after upscaling is switched on is an upscaling quality problem. Each of these has its own mechanism, and none of them is answered by the steps in this guide.

Finally, there are things this guide will never teach, and a source that teaches them should be closed. Never edit the registry. Never install an unofficial "HDR repair tool". Never download a single DLL file from the internet. None of these is a diagnosis, and each one trades a working machine for a less safe one.

When to Stop and Bring the Machine In

Stop when all seven steps have been worked through, one variable at a time, and the frame rate still falls sharply after every item has been restored — or when the question becomes which part to change, rather than which setting moved. Stop sooner if any step involves editing the registry or downloading files from an unknown source.

Bring the machine in with the notes from every step: the frame rate with HDR on and off, the resolution, refresh rate, and chroma subsampling comparison, the graphics card usage, and which games are affected. In-store inspection takes place at Room 1209, Dali Plaza, Shek Mun. You can call 2186 8010, or reach the shop on WhatsApp at 6558 6806. Inspection is charged at the site's published three-tier fees of HK$400–2,800, quoted after inspection. There is no home-visit service and no Mong Kok shop; inspection is carried out in the shop.

A diagnosis that ends at the stop line is not a failed diagnosis. A note that says "Same scene, same settings: frame rate lower with HDR on, refresh rate fell from 144 Hz to 60 Hz when HDR was switched on, graphics card usage unchanged, two games affected, Auto HDR off made no difference" is a precise description of where the fault lives, and it is exactly what an in-store inspection needs to start from the right place instead of from the beginning.

Frequently Asked Questions

Q1: Does HDR itself always cost a lot of frame rate?

No. Most modern games already render internally in high dynamic range, so switching HDR on mainly changes the output path, not the rendering work. The cost exists, but it is small, and it varies with the scene. When the frame rate really falls after HDR is switched on, the cause is usually something that changed at the same time — a mode switch, a conversion layer, or a setting that moved. Blaming HDR itself stops the diagnosis at the trigger and never reaches the cause.

Q2: Does a frame rate drop after enabling HDR mean my graphics card is not powerful enough?

No. The cause is usually something that changed alongside HDR — a mode switch, a conversion layer, or a refresh rate that moved — not the graphics card's rendering power. Check the graphics card usage with HDR on and off: if the usage has not risen while the frame rate has fallen, the rendering load has not risen, and the card is not the bottleneck. Restore the changed settings one at a time before considering any hardware change.

Q3: The picture looks much better with HDR on. Does that mean performance must have dropped a lot?

No. How good the picture looks and how much performance it costs are not tied together. The improvement comes from the wider range of brightness and the deeper colour, not from extra rendering work, so a picture can look clearly better while the frame rate barely moves. Judge the cost by the measured frame rate in the same scene, not by how much better the picture looks. A beautiful picture and a large frame rate drop are two separate facts.

Q4: Input lag has increased since I switched HDR on. Does that mean the frame rate has dropped?

No. Input lag is the time between the graphics card producing a frame and the display showing it; frame rate is how many frames are rendered per second. They are two different things. After HDR is switched on, the display may switch into a different processing mode, and the input lag may increase, while the frame rate stays exactly where it was. Measure the frame rate with the game's built-in counter or a monitoring tool, and do not let a feeling of slowness stand in for a number.

Q5: Will a more expensive cable fix the frame rate drop?

No. A cable will not make the frame rate fall, and changing the cable will not raise the frame rate. What a cable affects is the mode: whether the display can hold its resolution, refresh rate, and colour depth at the bandwidth available. If the frame rate has fallen, the cause is in the mode or conversion layers, and the cable is at most a contributor to a mode switch. Change the cable to rule out the bandwidth layer, not to fix the frame rate.

Q6: If I turn HDR off, will the frame rate come straight back?

Not necessarily. If the frame rate does not recover after HDR is switched off, the problem was never HDR in the first place. Something else has changed — a driver setting, a game setting, or a background program — and that something is still in effect. Start the diagnosis again from the beginning: measure the frame rate, compare the settings, and find what actually changed. A problem that survives the removal of its supposed cause was never caused by it.

Q7: How do I measure the HDR on-versus-off difference properly?

Run the same game, in the same scene, at the same quality settings, once with HDR on and once with HDR off, and write down the frame rate in each case, using the game's built-in counter or a monitoring tool. Do not change the scene or the quality preset between the two runs. Then compare the resolution, refresh rate, chroma subsampling, and colour depth in both states: if any of those changed, the mode switch is part of what you are measuring, not just HDR.

Q8: How do I check whether the resolution, refresh rate, and chroma subsampling changed when HDR was switched on?

Before switching HDR on, write down the resolution, the refresh rate, the chroma subsampling, and the colour depth. After switching it on, compare each one again. If the refresh rate has fallen from a higher rate to a lower one, or the chroma subsampling has changed, the problem is a mode switch, not a rendering cost. Read the result together with the graphics card usage: if the usage has not changed noticeably while the frame rate has fallen, the cause is in the mode, bandwidth, or conversion layers, not the rendering load.

Q9: Only one game loses frame rate with HDR on — or all of them? And what should I switch off first?

If only one game loses frame rate with HDR on, the problem is that game's HDR path — its in-game HDR setting, or a conversion layer acting on that game alone — rather than the system. If every game loses frame rate, the cause is at the system level: the driver, the Windows HDR setting, or the cable and interface. Test at least one other game that supports HDR the same way, with two numbers written down, before deciding which direction to follow. Once the split is made, switch things off one at a time, and measure again after each change. Switch off Windows Auto HDR first, then NVIDIA RTX HDR, then any driver-level conversion, then the game's own in-game HDR setting. Auto HDR and RTX HDR are conversion layers that turn standard dynamic range content into HDR, and either one can be the cause. If the frame rate returns after one of them is switched off, that conversion layer was the culprit, not HDR itself. The figure of roughly 5–7 percent quoted for NVIDIA RTX HDR describes that conversion layer only, never the cost of native HDR.

Q10: When should I stop trying things myself and bring the machine in for inspection?

Stop when all seven steps have been worked through and the frame rate still falls sharply after every item has been restored one at a time, or when the question becomes which part to change rather than which setting moved. Stop sooner if any step involves editing the registry or downloading files from an unknown source. Bring your notes: the frame rate with HDR on and off, the resolution, refresh rate, and chroma subsampling comparison, the graphics card usage, and which games are affected. In-store inspection is at Room 1209, Dali Plaza, Shek Mun, charged at the site's published three-tier fees of HK$400–2,800, quoted after inspection. You can call 2186 8010 or WhatsApp 6558 6806.

Related articles

Related services

If you need Chip-level GPU repair, see these service pages: