GPU Driver Settings Not Saving or Resetting on Restart? Corrupt Profile Diagnosis & Reset Guide

2026-11-05 | GPU維修 | 20 min | HK GPU Fix 編輯部

GPU Driver Settings Not Saving or Resetting on Restart? Corrupt Profile Diagnosis & Reset Guide

Key Takeaways

Driver settings that will not apply, will not save, or vanish after a restart usually point to different layers: priority rules, permissions, a damaged profile file, Fast Startup, or the Windows colour loader. Identify which symptom you have first, then work through the checks in order, changing one variable at a time.

Three Symptoms That Sound the Same but Are Not

"My settings disappeared" can describe three completely different failures, and each one points at a different layer. Treating them as one problem is the most common reason this issue drags on for weeks. Before changing anything, work out which of the three you actually have.

The first symptom is settings that do not take effect. You change a value, click Apply, and nothing changes on screen or in the game. The setting appears to be accepted, but the result never arrives.

The second symptom is settings that will not save. You click Apply and an error appears at once, or you close the control panel and reopen it to find the old values back. The setting does not even survive within the same session.

The third symptom is settings that reset on restart. The setting works right now — the picture changes, the game behaves differently — but after a shutdown or a restart everything is back to defaults.

These three symptoms have different causes, so the diagnostic order is different for each. A setting that never takes effect is usually a priority or profile-scope problem. A setting that cannot be saved is usually a permissions, service, or single-profile problem. A setting that resets on restart is usually a Windows startup behaviour, a colour-system override, or a damaged profile file. The table below is the backbone of this guide: match your symptom first, then follow the matching section.

SymptomMost likely layerLayers to rule out as well
Apply changes nothingPriority rules, Global vs Program confusion, wrong executable, engine does not support the settingDamaged profile file
Apply shows an error, or the value reverts at onceInsufficient permissions, background service stopped, one damaged game profile, damaged Windows user profileDamaged driver files
Works now, reverts after restartFast Startup, Windows colour loader, EDID misread, damaged profile file, reported driver-version issueWindows Update replacing the driver
Only one game is affectedProgram profile problem, wrong executable, in-game setting overridingWhole profile database damaged
Only colour settings revertColour loader, ICC profile conflict, Fast Startup3D profile database damaged

This guide assumes the driver control panel itself opens. If the panel will not open at all, that is a different fault with a different diagnostic path. It also assumes the driver is installed; an installer that fails outright is again a separate problem. What follows is about the settings layer: the profile database, the permissions around it, and the Windows behaviours that can overwrite it.

Why a Setting Changes Nothing When You Click Apply

The most common reason a 3D setting appears to do nothing is priority. In the NVIDIA Control Panel, the first page of the 3D settings offers a choice between letting the 3D application decide and using the advanced 3D image settings. When "Let the 3D application decide" is selected, the settings on the second page do not take effect at all, because control has been handed to the application. The in-game settings are the ones that matter in that mode. Forcing a setting from the driver side, such as forcing vertical sync on or off, overrides the in-game setting instead. These two modes cannot both win: whichever side holds control is the side whose value is used.

The second common reason is the split between Global Settings and Program Settings. Global Settings are the default for every program. Program Settings apply to one specific executable and override the global value for that program only. A user who changes a global value and then launches a game that has its own program profile will see no change, because the program profile wins. The fix is to check whether the game has a program profile at all, and if it does, to change the setting there rather than globally.

The third reason is the wrong executable. Some games launch through a launcher stub, and the program that actually renders the picture is a different executable file. If the profile is attached to the launcher rather than the rendering executable, the settings never reach the game. Check which executable is actually running while the game is open, and attach the profile to that file.

The fourth reason is that the game engine itself does not support the setting. Some older engines do not support forced anti-aliasing or certain driver-level overrides, so no driver setting will produce a visible change. That is not a fault in the driver or the profile; the setting simply does not apply in that environment. The same applies to settings that only work under a particular graphics API: a setting tied to one API will do nothing in a game running under another.

The sorting question for this symptom is simple: does the problem affect every setting and every game, or only one setting or one game? If only one game is affected, the answer is almost always priority, profile scope, or the wrong executable. If nothing at all takes effect, keep going down the diagnostic ladder, because the profile file itself may be damaged.

Why a Setting Will Not Save at All

When a setting cannot be saved even within the same session, the problem is usually write access rather than the setting itself. The NVIDIA Control Panel writes to a protected location — the driver profile database and related registry entries. If it cannot write there, it reports an error such as "Access Denied. Failed to apply selected settings to your system." The first diagnostic step is to run the control panel as an administrator: right-click its entry and choose to run as administrator, then try the same change again. If it works under an administrator account, the cause is permissions. If it still fails, permissions are ruled out and the investigation moves on.

A second layer is the background service. The control panel can open while its background service is stopped or stuck, and in that state it cannot write settings even though it can display them. On NVIDIA systems, check the NVIDIA Display Container LS service in services.msc and confirm it is set to start automatically and is running. On AMD systems, the equivalent is the AMD External Events Utility. A stopped service should be restarted, and then the setting should be tried again.

A third layer is a single damaged game profile. If changing the settings for one particular game produces an error while every other setting saves normally, the fault is that one profile, not the whole driver. The rest of the profile database is healthy, so there is no reason to reinstall the driver or reset everything. The fix for one damaged profile is to delete or rebuild that one profile, which is covered later in this guide.

A fourth layer is the Windows user profile itself. If settings save normally after logging in with a newly created local administrator account, the original account's profile or permissions are damaged. This is a cheap test that separates an account-level problem from a system-level one, and it costs far less than reinstalling the whole driver. If the new account has the same problem, the fault sits at the system or driver layer instead.

The sorting questions for this symptom are: is there an error message, does it affect one setting or one game or everything, and does running as administrator or switching accounts change the result? Each answer removes one layer from the list.

Why Settings Revert After a Restart

A setting that works now and reverts after a restart is usually being overwritten at startup, or is never being loaded correctly at startup. The layers are different from the ones above, and they are worth checking before touching the driver at all.

Windows Fast Startup is one of the most frequently reported causes. Fast Startup uses a hybrid shutdown, closer to hibernation than to a full shutdown, so the driver may not be fully re-initialised on the next boot and settings written to the registry may not load correctly. Disabling Fast Startup is a common repair step: open Control Panel, go to Power Options, choose what the power buttons do, and turn off Fast Startup. The important detail is how to test afterwards. A shutdown followed by powering on is not the same as a restart while Fast Startup is involved, because Fast Startup affects the shutdown path. Use a proper restart to test whether the problem is gone.

The Windows colour system is the classic cause when only colour settings revert. The Calibration Loader task, found in Task Scheduler under Microsoft, Windows, WindowsColorSystem, loads the Windows default colour settings at logon, and it can overwrite NVIDIA colour settings such as Digital Vibrance, brightness, and gamma. This is not driver damage; it is one system overwriting another at logon. Disabling the Calibration Loader stops Windows from overwriting the colour settings at logon, but it carries a warning: Windows will no longer load calibration settings automatically, so anyone who has had a professional colour calibration done should back up the ICC colour profile first and treat this step with care. An ICC profile conflict in the Colour Management settings can produce the same symptom.

Display EDID misreads are another startup layer. Windows occasionally reads the monitor's EDID data incorrectly at boot and falls back to a 60 Hz refresh rate or an RGB default colour format. This has nothing to do with the driver profile file, and it is more common with multiple monitors. Testing with a single monitor connected can help separate an EDID problem from a profile problem.

Some driver versions have also had reported problems with settings persistence. Reports have pointed to versions around 565.90 for Digital Vibrance resetting, and to combinations of Windows 11 24H2 with NVIDIA drivers for refresh rate and colour format reverting after restart. These are reports about specific versions, not a rule that any version is faulty, and no proportion of affected users can be stated from the available sources. A version-related problem should be treated as one hypothesis among several, tested by the same step-by-step method, not assumed from the start.

Finally, a damaged profile file itself can cause restart reverts. If the file is written in a damaged state, the driver may load it, fail, and silently substitute default values. From the user's point of view the setting simply did not survive the restart. The direct evidence for this layer is that restoring defaults inside the control panel and then re-entering the settings makes the problem disappear: the old profile was the problem.

A Windows Update that replaces the driver during the update can also reset settings. That path is covered in detail in a separate guide on updates replacing drivers, so it is mentioned here only as a checkpoint: note whether the resets began immediately after an update.

How Driver Profile Files Work: NVIDIA and AMD Are Different

The driver and its settings file are two separate layers. The driver can be completely healthy while its settings file is damaged, and the reverse is also true. The first step in any diagnosis is to work out which layer is at fault, and the two brands store their settings in entirely different places, so their repair steps must not be mixed up.

NVIDIA: the DRS profile database

NVIDIA stores global settings and per-application settings in a profile database known as DRS, for Driver Settings. The Global Settings and Program Settings pages in the control panel read and write this database. The database files live in C:\ProgramData\NVIDIA Corporation\Drs. ProgramData is a system folder shared by the whole machine and hidden by default.

The database can be damaged by an interrupted driver update, a hard shutdown, a system crash, write permissions being blocked, or a third-party tool writing to it incorrectly. Damage does not necessarily stop the panel from opening. The panel can open normally while writing fails, reading fails, or loading silently substitutes default values. That quiet substitution is the core situation in this guide.

The gentlest built-in repair is inside the control panel itself: Manage 3D Settings, then Restore Defaults. This clears the settings back to their defaults without touching the driver. If the problem disappears after restoring defaults and re-entering the settings, the old profile file was the fault, and the diagnosis is confirmed.

NVIDIA Profile Inspector is a third-party tool, not developed or supported by NVIDIA, that reads and writes the profile database through the driver's public API. It can export and import individual profiles as .nip backup files and delete one damaged game profile without touching the rest. Because it is a third-party tool, it must be run as an administrator, and it should only be downloaded from a trusted source such as its official GitHub repository or a reputable download site. It must never be presented as an official NVIDIA tool, and unknown download sites should not be used. The backup concept is worth adopting generally: export profiles before a driver update, so a damaged profile can be restored rather than rebuilt from scratch.

AMD: the gmdb.blb file and the CN folder

AMD Software: Adrenalin Edition stores user settings, game profiles, and tuning settings in a file called gmdb.blb, located in %localappdata%\AMD\CN, which is C:\Users\<username>\AppData\Local\AMD\CN. The file can be damaged by a driver update, a hard shutdown, or a Windows crash. Severe damage can stop the panel from opening; lighter damage shows up as settings that will not save or that revert after a restart.

The key mechanism to understand is that an ordinary driver reinstall does not clear this file. A standard reinstall keeps the CN folder so that user settings survive, which means a damaged gmdb.blb survives the reinstall untouched. This is why some users reinstall several times and the problem stays exactly the same: the fault was never in the driver layer.

The repair is to close every AMD program first — end AMD Software, RadeonSoftware.exe, and AMDRSServ.exe in Task Manager — then delete gmdb.blb and restart. Adrenalin rebuilds a fresh file automatically. If that does not work, delete the whole CN folder, which Adrenalin will also rebuild on its next start. The cost of deleting the whole CN folder is that every custom setting is lost, including game profiles, colour settings, and fan curves, so the existing settings should be recorded with screenshots or notes before doing it. As a safer habit, rename the folder to CN.old instead of deleting it outright, and only delete it once the problem is confirmed fixed.

AMD Software has two built-in tools for the same job. Snap Settings exports a snapshot of the settings as a backup file, and Factory Reset, under Settings and then System and then Perform Reset, returns all settings and profiles to their defaults without reinstalling the driver. The driver installer's Additional Options screen also offers a Factory Reset option, which is a related but not identical function. One caution from AMD is worth recording accurately: using the Factory Reset option while Windows is installing an update can, in rare cases, damage the Windows installation. Finish or pause Windows updates before installing a driver. The risk is rare, and it should not be exaggerated.

The Diagnostic Ladder: Mildest First, One Variable at a Time

Do not start with a clean driver reinstall. Work from the mildest, least destructive step upward, and change only one variable at a time. If several things are changed at once and the problem goes away, nobody knows which step fixed it, and the next time it happens the whole process has to start from the beginning. After each step, test the same setting in the same way and record the result.

  1. Characterise the symptom. Which kind of setting is affected, and when does it fail: does it never take effect, does it fail to save, or does it revert only after a restart? Is it every setting or one setting, every game or one game? Match the answer against the table at the top of this guide.
  2. Try a different setting. Change something simple and immediately visible, such as moving Digital Vibrance by one step, or changing an unrelated 3D setting. If only one setting fails, the fault is that setting or that profile. If everything fails, keep going down the ladder.
  3. Check the priority settings. On NVIDIA, confirm whether "Let the 3D application decide" or "Use the advanced 3D image settings" is selected. Check Global Settings against Program Settings, and confirm the profile is attached to the correct executable. This step rules out the case where nothing is broken and the setting simply is not the one in control.
  4. Run the control panel as an administrator. Right-click and run as administrator, then try the same change. If it works, the cause is permissions. If it does not, permissions are ruled out.
  5. Check the background service. In services.msc, confirm the NVIDIA Display Container LS service, or the AMD External Events Utility on AMD systems, is set to automatic and is running. Restart the service if it is stopped, then try again.
  6. Pause other control software, one at a time. Temporarily close software that might overwrite settings, such as in-game settings, other tuning tools, or colour management software. Close one at a time so the culprit can be identified. This step is for diagnosis only; conflicts between control programs are a separate topic covered in their own guide.
  7. Disable Windows Fast Startup. Turn it off in Power Options, then perform a proper restart, not a shutdown and power-on. If the problem disappears, Fast Startup was the layer.
  8. Check the Windows colour system. If only colour settings revert, check the ICC profile in Colour Management and the Calibration Loader task in Task Scheduler. Disabling the task stops Windows from overwriting colour settings at logon. Remember the warning: users with a professional colour calibration should back up the ICC profile first.
  9. Restore defaults inside the panel. NVIDIA: Manage 3D Settings, then Restore Defaults. AMD: Settings, System, then Perform Reset. If re-entering the settings afterwards works normally, the old profile file was damaged and the problem is resolved.
  10. Delete and rebuild the profile file. NVIDIA: back up and then delete the contents of the Drs folder, and only that folder. AMD: delete gmdb.blb, or the whole CN folder if that fails. Close the related programs before deleting, and never delete while the program is running.
  11. Test with a new Windows user account. Create a new local administrator account, log in, and try saving a setting. If the new account works, the original account's profile or permissions are damaged. If the new account fails the same way, the fault is at the system or driver layer.
  12. Clean reinstall of the driver. Only if every step above has failed should the driver layer itself be treated as the suspect. The last-resort method is described in the next section.

Reset Methods, From Gentlest to Most Thorough

MethodWhat it clearsWhen to use itCost and risk
Restore Defaults or Factory Reset inside the panelAll custom settings, back to defaultsSuspected damaged profile, settings in a messSettings are lost; record or back them up first
Delete one game profileThat game's settings onlyOnly one game is affectedOther settings survive; third-party tools need a trusted source
Delete and rebuild the profile file (Drs folder or CN folder)The whole profile fileRestore Defaults did not work, profile confirmed damagedAll custom settings lost; close related programs before deleting
Clean install from the driver installerOld driver settings, not necessarily the profile fileProblem began after a driver updateMay leave a damaged AMD CN folder behind
DDU clean reinstallWhole driver, leftover files, Driver Store records, panel settingsSee the conditions belowHeavy; all panel settings lost, preparation required
New Windows user accountNothing; a test onlySuspected damaged user accountFiles and settings need moving if the account is adopted

DDU: The Last Resort, Not the First Step

Display Driver Uninstaller, or DDU, is a free third-party tool from Wagnardsoft. Run in Safe Mode, it removes the graphics driver thoroughly, including registry entries, Driver Store records, folders, and control panel settings that an ordinary uninstall leaves behind.

DDU fits specific situations: changing graphics card brand, a driver installer that fails or refuses to run, a problem that follows across two or more driver versions, a Code 43 in Device Manager, or an installation interrupted by a power cut. It does not fit routine driver updates, a problem with a single game, suspected cooling or power problems, or reinstalling for reassurance. DDU will not make a graphics card faster; it only removes one variable from the investigation.

For this guide, DDU is the last step of the profile-damage ladder, not the first. If restoring defaults or deleting the profile file already solved the problem, DDU is unnecessary. DDU addresses leftover driver files; it is not the treatment for a damaged settings file.

Before running DDU, download the new driver first and keep it on the hard drive, because after the cleanup the system may only have a basic display driver and getting online can be awkward. Disconnect from the network while DDU runs, so Windows Update does not install an old driver halfway through. Download DDU only from the Wagnardsoft website or the Guru3D official mirror; copies from other download sites carry a risk of malicious software. Expect the screen to go black or drop to a low resolution during the process; that is normal. If a black screen persists and does not recover, follow recovery steps rather than assuming success. DDU also clears every control panel setting, including custom resolutions, colour profiles, per-game profiles, and FreeSync or G-Sync settings. On a BitLocker-encrypted drive, have the recovery key ready first. And DDU cannot repair a hardware fault, overheating, insufficient power, or a memory problem: if a clean reinstall leaves the problem unchanged, the fault is probably not in the driver.

Common Mistakes That Waste Time

The first mistake is assuming every settings problem is a driver version problem. Priority rules, profile scope, permissions, Fast Startup, and the colour system have nothing to do with the driver version, and chasing newer or older drivers will not move them. The second mistake is assuming a reinstall fixes everything. On AMD systems the CN folder survives a standard reinstall, and on NVIDIA systems the Drs folder is not necessarily cleared either, so reinstalling several times proves nothing about the driver layer. The third mistake is reaching for DDU at the first sign of trouble. It is a heavy tool, not routine maintenance, and a healthy system does not need it.

The fourth mistake is deleting system files at random. Only the files named in this guide should be deleted — the Drs folder contents, gmdb.blb, or the CN folder — and they should be backed up or renamed first, for example to CN.old, with the original deleted only after the fix is confirmed. Nothing else in ProgramData, AppData, or the registry should be removed on a guess. Registry steps should only be attempted where a named source supports them, and the registry should be backed up first.

The fifth mistake is reading a settings problem as a hardware failure. Settings that will not save are, in the great majority of cases, a software-layer problem in the profile file, permissions, or Windows settings, not a sign that the card is failing. Replacing a card on this evidence alone would be a costly error. The sixth mistake is the colour version of the same error: colour settings reverting after restart are often the Calibration Loader or an ICC conflict, not a damaged driver.

The seventh mistake is assuming in-game settings and driver settings can both apply at once and that it does not matter which wins. The priority rules are definite: a forced driver setting overrides the in-game setting, while "application controlled" hands control back to the game. Two different values in the two places produce one result, following one side, never a blend of both. The eighth mistake is treating third-party profile tools as risk-free. Tools such as NVIDIA Profile Inspector can change hidden driver settings, and a wrong change can cause games to behave strangely, crash, or lose performance. Back up the profile first, verify the change in the control panel, and never change a batch of settings at once.

The ninth mistake is assuming Windows Update never touches driver settings. It can replace the driver version and reset settings to defaults, which is why the timing of an update is always worth noting. The tenth mistake is assuming one account's problem means the whole machine is broken. A damaged user profile can be isolated cheaply with a new account test, without reinstalling anything.

Edge Cases Worth Knowing

Multiple monitors make settings-reset problems more common, particularly for refresh rate and colour format, and EDID misreads are more likely with more than one display connected. When diagnosing, ask whether more than one monitor is in use, and test with a single monitor.

Laptops with both integrated and dedicated graphics need extra care. Their display settings can be affected by the manufacturer's own driver and power management, and after DDU the manufacturer's driver may be needed before brightness controls or shortcut keys work again. Laptop steps should not be copied directly from desktop steps.

Windows 11 24H2 combined with NVIDIA drivers has been reported to show refresh rate and colour format reverting after restart. This can be mentioned as a reported combination with known issues, but it must not be stated as a certainty that a given version is faulty, and no proportion of affected users should be claimed.

Some settings only work in particular games or under a particular graphics API. A setting that only applies under one API will show no effect in a game running under another, and that is not a failure to save. NVIDIA App, introduced in 2024 to replace GeForce Experience, is also worth noting: some advanced settings, such as detailed per-game profile management, are still only available in the traditional control panel, so readers should be told which interface holds which setting rather than assuming one or the other.

Users who have had a professional colour calibration should not follow the general colour steps blindly. Disabling the Calibration Loader or resetting colour settings can affect the calibration result, so the ICC profile should be backed up first.

Finally, the grey area is real: sometimes two layers fail at once, for example a driver update interrupted by a crash that damages both the driver and the profile file. The ladder allows for that. Finish the profile reset, and if the problem is still there, move up to the driver layer. Never assume there is only one cause.

Prevention: Back Up the Profile Before It Breaks

The cheapest protection is a backup taken before anything goes wrong. On NVIDIA systems, export profiles with NVIDIA Profile Inspector before a driver update, and keep the .nip file somewhere safe. On AMD systems, use Snap Settings to export a settings snapshot before updating. Take screenshots of the settings pages as well, so a rebuild does not depend on memory.

Avoid hard shutdowns where possible, and let driver updates finish without interruption, since interrupted writes are one of the ways a profile file is damaged. When a driver update is planned, pause Windows updates first so the two processes do not run over each other. After an update, check one or two settings that matter, such as refresh rate and one game profile, before assuming everything survived. Catching a reset early, while the old values are still remembered, is far easier than reconstructing them weeks later.

When to Ask for Help

If the ladder has been worked through — priority checked, administrator run tried, services checked, Fast Startup disabled, colour loader checked, defaults restored, the profile file deleted and rebuilt, a new account tested — and the settings still will not save or still revert on restart, the remaining possibilities narrow to a deeper driver-layer problem or a fault outside the settings layer. At that point a professional diagnosis is the sensible next step, rather than deleting further system files or repeating the same reinstall.

The shop's published three-tier pricing is HK$400–2,800. A settings problem that survives the steps in this guide should be described with the symptom type, which settings are affected, and which steps have already been tried, so the diagnosis starts from evidence rather than from the beginning. The shop is at Room 1209, Dali Plaza, Shek Mun. The telephone number is 2186 8010, and WhatsApp is 6558 6806. There is no on-site service, so the machine should be brought to the shop for inspection.

FAQ

Why do my NVIDIA settings reset every time I restart?

The most common causes are Windows Fast Startup, the Windows Calibration Loader overwriting colour settings at logon, a damaged profile database in the Drs folder, or a reported issue with a particular driver version. Start by disabling Fast Startup and testing with a proper restart. If only colour settings revert, check the Calibration Loader task and the ICC profile. If restoring defaults in the control panel and re-entering the settings fixes it, the old profile file was damaged.

Why does the control panel say "Access Denied" when I click Apply?

The panel cannot write to the protected profile database or registry location. Run the control panel as an administrator first. If that does not work, check that the NVIDIA Display Container LS service is running, and consider whether a single game profile is damaged. The error message itself is useful evidence: note the exact wording and which setting produced it.

I reinstalled the driver, but the settings still reset. Why?

Because a standard reinstall does not necessarily clear the settings file. On AMD systems the CN folder, including gmdb.blb, is kept so settings survive the reinstall, and a damaged file survives with it. On NVIDIA systems the Drs folder is not necessarily cleared either. A reinstall only proves something about the driver layer; the profile file needs its own step, either restoring defaults in the panel or deleting and rebuilding the file.

How do I know whether the problem is the profile file or the driver?

Restore defaults inside the control panel and re-enter the settings. If the problem disappears, the old profile was the fault. If the problem affects only one game while all other settings save normally, it is that game's profile. If the problem follows across two or more driver versions, the driver layer becomes the suspect, and that is when a clean reinstall with DDU becomes worth considering.

Can I delete the AMD CN folder safely?

Yes, with preparation. Close all AMD programs first, back up the settings or take screenshots, and rename the folder to CN.old rather than deleting it outright. Adrenalin rebuilds the folder on its next start. Deleting it clears every custom setting, including game profiles, colour settings, and fan curves, so it should only be done after the milder steps have failed.

Is NVIDIA Profile Inspector an official NVIDIA tool?

No. It is a third-party tool that reads and writes the profile database through the driver's public API, and NVIDIA does not develop or support it. It should only be downloaded from a trusted source, it must be run as an administrator, and profiles should be backed up before any change. It is useful for exporting a backup and for removing one damaged game profile, but it should not be treated as an official utility.

Why does my game ignore the driver settings I set for it?

Check the priority first. If "Let the 3D application decide" is selected, the driver's 3D settings page does not apply and the in-game settings control the result. Check also whether the game has its own program profile that overrides the global settings, and whether the profile is attached to the correct executable — some games launch through a stub, and the rendering program is a different file. Some engines also do not support certain forced settings at all.

Should I use DDU the first time settings fail to save?

No. DDU is the last step, not the first. Work through the ladder: priority, administrator run, services, Fast Startup, colour loader, restore defaults, and rebuilding the profile file. DDU is for problems that survive those steps, or for the specific situations listed in this guide, such as changing card brand or a problem that follows across several driver versions. DDU clears every control panel setting, so it should never be the opening move.

Related articles

Related services

If you need Chip-level GPU repair, see these service pages: